TOHATSU MFS 25D Owner's Manual page 76

76
INSPECTION AND MAINTENANCE
6. Fill the engine through the filler port
with the recommended trapped oil to
between the upper and lower limit
mark on the dipstick.
7. Tighten the oil filler cap.
8. Leave the outboard motor for 5 min-
utes and check oil level on the dip-
stick. Add oil if necessary.
9. Insert the dipstick to the hole com-
pletely and install the top cowl.
10. Start the engine and idling for 5 minu-
ets, then check for no oil leaks and no
warning indicate.
1
1. Filler cap
2. Dipstick
3. Filler port
10
1. Upper limit
2. Lower limit
2
3
ENOF02510-0
1
2
ENOF02511-0
ENON00920-0
Note
Use only recommended engine oil (See
page 33)
Oil volume needed for complete oil replacement
With oil filter
replacement
Approximately 1700 mL
(1.8/1.5 US/Imp. qt.)
ENOW00925-0
CAUTION
Wipe off engine oil well immediately if spilled
and dispose of it in accordance with local
fire prevention and environment protection
regulations.
ENON00031-0
Notes
If any amount of water is found in
engine oil, making it milky white, consult
dealer.
If engine oil is contaminated with fuel,
emitting strong fuel smell, consult
dealer.
Some oil dilution is normal if engine is
idled or trolled for long periods, espe-
cially in cooler water temperatures.
Without oil filter
replacement
Approximately 1500 mL
(1.6/1.3 US/Imp. qt.)