TOHATSU MFS 25D Owner's Manual page 47

ENOM01826-0
Engine speeds
Idling speed after warming up.
Remark: The idling speed automatically
increases depending on the engine tem-
perature. When the engine reaches nor-
mal operating temperature, it will return
to the specified idling speed.
Clutch in (In gear)
-1
850 min (rpm)
ENOM00972-0
Free throttle lever (Side mount RC
type)
ENOW00956-0
CAUTION
Keep the free throttle lever fully closed-
position when start the engine.
The free throttle lever is inoperative
unless the control lever is in neutral.
Also, the control lever is inoperative
unless the free throttle lever is returned
to the fully-closed position.
The free throttle lever is for warm-up
operation.(Not required for engine start-
ing) With the control lever in neutral,
move the free throttle lever upward to
open the throttle.
1. Fully-open
2. Fully-closed
Clutch off (Out of gear)
-1
850 min (rpm)
1
2
ENOF00934-0
ENOM00880-A
Trolling speed control
If the main switch key (for basic tiller han-
dle model: Push switch) is pressed for 1
(one) second during idling or trolling
operation, engine speed changes.
ON
each time the main switch key is pressed.
Engine speed changes as follows.
Starting
-1
850 min (rpm) 750 min
-1
950 min (rpm) 850 min
-1
1050 min (rpm)
Buzzer makes one short sound when the
engine speed is set to 750 min
indicating the minimum trolling speed is
set.
Buzzer makes two short sound when the
engine speed is set to 1,050 min
indicating the maximum trolling speed is
set.
Trolling speed control function will reset
ENGINE OPERATION
ENOF02540-0
1
second
ENOF00876-0
-1
(rpm)
-1
(rpm)
-1
950 min (rpm)
-1
(rpm),
-1
(rpm),
47
7