Display Setting - Toshiba LF516 Instruction Manual

Switch operation
STEP1
STEP2
STEP3
STEP4
STEP5(=END)

8.2.6 Display Setting

You can select one of the engineering units listed below as a flow measurement unit.
Flow velocity unit
Flow rate unit
(Note3)
Volume unit
Other units
Totalized flow direction
Totalized difference flow
Note 1: If COUNT, RANGE, GRAPH or CUSTOM is selected, the display is shown below:
Display example
FLOW DIR
The currently set flow direction (NORMAL
in this example) appears.
NORMAL
Then push
* Pushing
ESC
FLOW DIR
The switches at the bottom change.
(
NORMAL
At the same time, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push
FLOW DIR
You can continue to change the setting item.
Pushing
SWITCH
items.
FLOW DIR
Perform this operation to change the setting
to SWITCH.
SWITCH
When the desired item is obtained, push
FLOW DIR
Pushing
whether the setting is OK or not.
SWITCH
If OK, push
setting, push
SET OK?
Pushing
and exits the setting screen.
ESC N O
O K
m/s, ft/s
3 3
m /s, m /min, m
mL/s, mL/min, mL/h, mL/d, gal/s, gal/min, gal/h, gal/d,
bbl/s, bbl/min, bbl/h, bbl/d, pt/s, pt/min, pt/h, pt/d,
qt/s, qt/min, qt/h, qt/d
3 3
ft /s, ft /min, ft
3
m , L , mL , gal , bbl , pt , qt, ft
% , COUNT , RANGE , GRAPH , CUSTOM
Forward direction (when F or B is selected)
Reverse direction (when R or B is selected)
Difference between totalized forward flow and totalized
reverse flow (when totalized flow direction D is selected)
− 59 −
Description
.
returns you to the setting
ESC
menu.
changes the selection
: Selected item is scrolled up.
: Selected item is scrolled down.
to set the item temporarily.
shows a message to confirm
. If you need to redo the
O K
.
N O
cancel the setting operation
ESC
3 3
/h, m /d , L/s, L/min, L/h, L/d,
3 3
/h, ft /d, Mgl/s, Mgl/min, Mgl/h, Mgl/d
3
, Mgl
6 F 8 A 0 9 3 4
are shown.)
.