Communication Setting - Toshiba LF516 Instruction Manual

The following is an example to change the switch position setting from BOTTOM to TOP.
Switch operation
STEP1
STEP2
STEP3
STEP4(=END)

8.2.29 Communication Setting

This setting is needed when optional PROFIBUS communication board is installed.
For details, refer to the instruction manual of PROFIBUS communication board.
* If communication board is not used, this address setting is not needed.
Display example
P:OTHERS
1 PASSWORD
2 LCD ADJ
3 SW POSN
4 EXIT
ESC
SW POSN
BOTTOM
ESC
SW POSN
BOTTOM
SW POSN
TOP
SW POSN
TOP
SET OK?
ESC N O
O K
− 100 −
Description
Select "SW POSN" from the setting item
selection menu.
The current setting (BOTTOM in this
example) appears.
Then push .
* Pushing returns you to the menu
ESC
screen.
The switches at the bottom change.
(
At the same time, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push
You can continue to change the setting item.
Push to change the selection
items.
: Selected item is scrolled up.
: Selected item is scrolled down.
When the desired item is selected, push
to set the item temporarily.
When you push
to confirm whether the setting is OK or not.
If OK, push . If you want to redo the
O K
setting, push .
N O
Pushing cancels the setting operation
ESC
and exits the setting screen.
6 F 8 A 0 9 3 4
are shown.)
.
, a message appears