Toshiba LF516 Instruction Manual page 82

●Digital output functions
Selection items
NO USE
H ALM
L ALM
HH ALM
LL ALM
RNG SIG1
RNG SIG2
PRESET C
CONV ALM
PLS OUT
PLS FRD
PLS REV
MRH ALM
MRL ALM
Notes: When the range type is set to Forward/reverse multiple ranges, and if the pulse output
(PLS OUT) is selected, pulses of forward and reverse directions will be output.
For setting method of the range type, see 8.2.9, "Span (Range)."
●Digital output active status (Only when alarm output is set )
Selection items
NormCLOSE
NormOPEN
●Changing the digital output function
The following is an example to change the Digital Output 1 (DO1) function from High alarm
output (H ALM) to Low alarm output (L ALM).
Switch operation
H:DO
1 DO1 FUNC
2 DO2 FUNC
3 DO1 STAT
4 DO2 STAT
5 EXIT
DO1 FUNC
STEP1
H ALM
ESC
Digital output functions
Not used
High alarm output
Low alarm output
High-High alarm output
Low-Low alarm output
Range output No. 1
Range output No. 2
Preset count output
Converter failure alarm output
Pulse output
Fixed forward flow pulse output
Fixed reverse flow pulse output
Multi-range high alarm output (option)
Multi-range low alarm output (option)
Alarm output action
Normal: Contact closed, Alarm out: Contact open
Normal: Contact open, Alarm out: Contact closed
Display example
Select "DO1 FUNC" from the setting item
selection menu.
ESC
The current setting (H ALM in this example)
appears.
Then push
* Pushing
screen.
− 81 −
6 F 8 A 0 9 3 4
Description
.
returns you to the menu
ESC