Toshiba LF516 Instruction Manual page 92

Switch operation
H SET
STEP2
OFF
H SET
STEP3
ON
H SET
STEP4(=END)
ON
SET OK?
ESC
●Changing the high/low alarm value
The following is an example to change the high alarm value from +105% to +103%.
Switch operation
L:H/L ALM1
1 H SET
2 H VAL
3 L SET
4 L VAL
5 EXIT
H VAL
STEP1
ESC
H VAL
STEP2
Display example
The switches at the bottom change.
(
At the same time, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push
You can continue to change the setting item.
Push
items.
When the desired item is selected, push
When you push
to confirm whether the setting is OK or not.
If OK, push
setting, push
Pushing
and exits the setting screen.
N O
O K
Display example
Select "H VAL" from the setting item
selection menu.
ESC
The currently set value (+105% in this
example) appears.
+105.0
Then push
%
The switches at the bottom change.
(
+105.0
At the same time, the cursor appears.
%
− 91 −
6 F 8 A 0 9 3 4
Description
are shown.)
.
to change the selection
: Selected item is scrolled up.
: Selected item is scrolled down.
to set the item temporarily.
, a message appears
. If you want to redo the
O K
.
N O
cancels the setting operation
ESC
Description
.
are shown.)