Installing/Replacing Msam Cards - VeriFone VX 520 Installation Manual

CAUTION
NOTE
Installing/
Replacing MSAM
Cards
CAUTION
To install or replace
MSAMs
7
Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door. (see
To prevent the paper roll cover from damaging the print roller, always gently press
down on the printer dust cover to close it.
Figure 8 Closing Paper Roll Cover
8
Tear the paper off against the serrated metal strip in the printer.
For paper ordering information, refer to
When you first receive your VX 520 Color D/E CTLS terminal, you may need to
install one or more MSAM cards or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Remove the power cord from the power outlet.
2
Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
Figure 8).
Accessories and
VX 520 C
T
ERMINAL

Installing/Replacing MSAM Cards

Documentation.
D/E CTLS I
OLOR NSTALLATION
S
ETUP
21
G
UIDE