Table of Contents
Advertisement
Antenna Unit
The front of the UX 410 Antenna Unit shows the following:
Features
•
Customer-view indicator LEDs that denote successful or erroneous
transactions through the LED color lighting and combination.
When the unit is ready to accept a transaction, the CTLS logo and first LED
from the left will light up. When you tap your card, all the LEDs will light up and
the buzzer will sound for about 2 seconds, prompting you to remove your card.
NOTE
The implementation of the LED color configuration varies by regional locations.
•
The CTLS logo showing the general area where users can tap their cards to
perform payment transactions.
•
The Clear Protective screen, which keeps the CTLS area safe from
scratches during the installation procedure. Make sure you remove this (using
the tab) after successfully mounting the UX 410 Antenna Unit.
Figure 2
The reverse side of the UX 410 Antenna Unit shows the following:
•
RJ45 host communication connector.
•
SMA (RF) antenna connector.
•
Four mounting posts.
•
Clear adhesive cover. Remove this cover prior to mounting the UX 410
Antenna Unit to aid in adhesion to the installation panel.
CLEAR
ADHESIVE
COVER
UX 410 Antenna Unit Reverse View
Examining Device Features
MOUNTING
POSTS
RJ45 PORT
SMA PORT
MOUNTING
POSTS
UX 410 I
G
NSTALLATION
UIDE
S
ETUP
11
Advertisement
Table of Contents
