Installing Or Replacing Msam Cards - VeriFone VX 600 Bluetooth Agnostic Installation Manual

D S
EVICE ETUP

Installing or Replacing MSAM Cards

Installing or
Replacing MSAM
Cards
CAUTION
To install or replace
MSAM cards
NOTE
14
VX 600 B
LUETOOTH
You may need to install one or more multiple security access module (MSAM)
cards or replace the old cards.
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Place the VX 600 Bluetooth Agnostic face down on a soft, clean surface to
protect the lens from scratches.
2
Loosen the screw from the compartment door.
3
Slide out the compartment door to access the MSAM cardholders.
Before inserting the MSAM card, position it as shown in
gold contacts facing away from you, toward the unit. The cardholder slot in the
VX 600 Bluetooth Agnostic has a set of contacts. The MSAM card has a notch on
one corner to ensure that it fits into the connector base in only one way.
Figure 4 Removing screw and opening compartment door
4
Slide the latch to the right to unlock the slot. Lift the cardholder and install the
MSAM card by aligning the card and sliding it into the slots. When the card is
fully inserted, swing the cardholder closed and then slide the latch to the left.
Figure 5 MSAM insertion
A I G
GNOSTIC NSTALLATION UIDE
Figure 5, with the card's