Clearing The History, Alarm, And Event Log Screens; Master Clear - ADC HiGain H2TU-C-202 User Manual

152-202-116-02, Issue 2
C H
LEARING THE
Select Master Clear to clear the History, Alarm, and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the startup session and ensures that your
data is meaningful.
Monitor Performance
Clear ALL performance, alarm and event log entries.
ID: xxxx--xxxx--xxxx--xxxx
To clear the Event Log:
1 Type E to select the Event Log screen (type
Log screen at the remote unit).
2 Type L to clear the screen.
3 Type Y to confirm the clearing of the history screen.
To clear an individual history or alarm screen:
1 Type P to select the Performance screen (type
Blockage Indicator (BI) History screen at the remote unit).
2 Press the SPACEBAR
H2TU-R HDSL2), then press
at the remote unit.
SPACEBAR
3 Press the
48 Hour History, or 31 Day History) then press
4 Type L to clear the screen.
5 Type Y to confirm the clearing of the history screen.
To clear all history, alarm, and event log screens:
1 Type C to select the Config screen.
2 Select Master Clear.
H2TU-C-202 List 1F
, A
ISTORY LARM
Event Log Config
+----------------------+
| Standard Options ->
| PairGain Options ->
| Date and Time
|

Master Clear

| Set Factory Defaults |
+----------------------+
02/15/00 12:30:01
Figure 25. Master Clear
to select either interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2, or
ENTER . Select H2TU-R DS1 if you wish to select the BI History screen
to select the type of statistics (Current, Alarm History, 25 Hour History,
March 14, 2000
Monitoring System Activity and Performance
, E L
AND VENT OG
Inventory Rlogon
|
|
-> |
|
Are you sure (Y/N)?
H2TU-C
R and then E if you wish to clear the Sectionalized Event
R and then P if you wish to select the
ENTER .
S
CREENS
Help
System: OK___
39