ADC H2TU-C-202 List 4E Quick Installation
Line unit
Hide thumbs
Also See for H2TU-C-202 List 4E:
- User manual (80 pages) ,
- Manual (74 pages) ,
- Quick installation (8 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for ADC H2TU-C-202 List 4E
Summary of Contents for ADC H2TU-C-202 List 4E
- Page 1 HiGain HiGain UICK NSTALLATION HiGain HDSL2 H2TU-C-202 L...
- Page 2 H2TU-C-202 L The HiGain H2TU-C-202 List 4E functions as the Central Office (CO) end of a repeaterless T1 Transmission system when connected to a HiGain HDSL2 remote unit (H2TU-R). Setting new standards for interoperability and efficiency, HiGain HDSL2 modules transmit a 1.544 Mbps T1 payload on one unconditioned copper pair over the full Carrier Service Area (CSA) range.
- Page 3 To comply with the intrabuilding wiring requirements of GR-1089 CORE, Section 4.5.9, the shields of the ABAM-type cables that connect the H2TU-C-202 List 4E DSX-1 output ports to the cross-connect panel must be grounded at both ends.
- Page 5 OOPBACK ESTING Initiate loopback testing from the HiGain HDSL2 maintenance screen accessed through the craft port. The inband codes can also be sent by a test set. H2TU-R H2TU-C DSX-1 TLOS* 1111110 NREM CLOC NLOC CREM 1111100 1110000 1111000 11000 SMJK Customer Network...
- Page 6 ONFIGURATION The H2TU-C-202 List 4E does not have a display or MODE and SEL pushbuttons. Set the switches on the on-board switch bank or access the maintenance terminal screens through the craft port to make configuration changes. The H2TU-C-202 List 4E has a configuration switch bank containing eight switches (located on the printed circuit card).
- Page 7 © 2002 ADC DSL Systems, Inc. All rights reserved. Information contained in this document is company private to ADC DSL Systems, Inc., and shall not be modified, used, copied, reproduced or disclosed in whole or in part without the written consent of ADC.
Need help?
Do you have a question about the H2TU-C-202 List 4E and is the answer not in the manual?
Questions and answers