Clearing The History, Alarm, And Event Log Screens; Master Clear - ADC HiGain H2TU-C-388 List 1E User Manual

Provisioning

Clearing the History, Alarm, and Event Log Screens

Select Master Clear to clear the History, Alarm, and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the startup session and ensures that you
have meaningful data thereafter.
Monitor Performance
Clear ALL performance, alarm and event log entries. Are you sure (Y/N)?
ID: xxxx--xxxx--xxxx--xxxx
To clear the Event Log, press
To clear an individual history or alarm screen, do the following:
1 Press P to select the Performance screen.
2 Press the SPACEBAR
H2TU-R HDSL2), then press
3 Press the SPACEBAR
Hour History, or 31 Day History) and press
–
Selecting 31 Day History allows you to clear the Current, 25 Hour, 48 Hour, and 31 Day
performance history screens for the selected interface.
–
Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL2 Alarm screens, see
4 Press L to clear the screen.
To clear ALL history, alarm, and event log screens:
C
1 Press to select the Config screen.
2 Select Master Clear.
Y
3 Press to clear all screens.
28
Event Log Config Inventory
+----------------------+
| Standard Options ->
| PairGain Options ->
| Date and Time
|

Master Clear

| Set Factory Defaults |
+----------------------+
04/21/00 12:30:01
Figure 11. Master Clear
E to select the Event Log screen, then press
to select either interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2 or
ENTER .
to select the type of statistics (Current, Alarm History, 25 Hour History, 48
ENTER
April 21, 2000
Rlogon Help
|
|
-> |
|
H2TU-C System: OK
L to clear the screen.
after your selection.
Table 18 on page
152-388-115-03, Issue 03
40.
H2TU-C-388 List 1E