Introduction; Features - Pylontech US5000 Series Operation Manual

3. Introduction

US5000 lithium iron phosphate battery is the new energy storage products
developed and produced by Pylontech, it can be used to support reliable high
power for various types of equipment and systems.

3.1 Features

1) Build-in soft-start function able to reduce current strike when inverter need
to start from battery.
2) Dual active protection on BMS level.
3) Automatic address setting when connect in multi-group.
4) Support wakeup by 5~12V signal from RJ45 port.
5) Support upgrade battery module from upper controller via CAN or RS485
communication.
6) Enable 95% depth of discharge, available for the inverter which completely
follow Pylontech latest protocol to operate.
7) The module is non-toxic, non-pollution and environmentally friendly.
8) Cathode material is made from LiFePO4 with safety performance and long
cycle life.
9) Battery management system (BMS)has protection functions including
over-discharge, over-charge, over-current and high/low temperature.
10) The system can automatically manage charge and discharge state and
balance voltage of each cell.
11) Flexible configuration, multiple battery modules can be in parallel for
expanding capacity and power.
12) Adopted self-cooling mode rapidly reduced system entire noise.
13) The module has less self-discharge, up to 6 months without charging it on
shelf, no memory effect, excellent performance of shallow charge and
discharge.
5