Pylontech US5000 Series Operation Manual page 20

2) For External cable kits:
NOTE: Power and communication cables connect to inverter belongs to an
External Cable Kit, NOT include in battery carton box . They are in another
extra small cable box. If there is anything missed, please contact dealer.
2 * 2000mm power cables (4 AWG, peak current capacity 120A, constant
-
100A) and communication cable for each energy storage system.
2 * 3000mm RJ45 communication cable, specification as below:
-
SN of RJ45cable
WI0SCAN30RJ1
WI0SCAN35RJ3
For the external cables, the length shall less than 3 meters.
Mark
With blue mark:
Battery-Inverter
With silver mark:
Battery-Battery
Pin
1~3: NULL
4~8: pin to pin
1~8: pin to pin
17
For connection to
inverter and HUB
For parallel
connection
between master
batteries