Mib2 Sysname; Mib2 Syslocation; Write Community; Read Community - GRASS VALLEY IQH4B User Manual

MIB2 sysName

Name of system if applicable.

MIB2 sysLocation

Customer-specified physical or logical location of system.

Write Community

Configures the SNMP write community value. Default value = Private.

Read Community

Configures the SNMP read community value. Default value = Public.

Trap Community

Configures the SNMP trap community value. Default value = Public.

Resend All Traps

Resends all current traps/notifications for all occupied slots and Gateway card.

Trap Receivers

The Gateway supports up to eight trap destinations. Each entry must be unique, unless the IP
trap address is set to 0.0.0.0. For each trap the user can configure:
60
• Enable: Enable this Trap destination.
• IP Address: The IP address to which notifications (traps) are sent. This is the IP address of
the PC monitoring notifications.
• Port: The connection port address used to send notifications. The PC monitoring
notifications should be configured to listen for notifications on this port. The SNMP default
is 162, but other port numbers may be used.