Snmp Setup; Read Write Port; Mib2 Syscontact - GRASS VALLEY IQH4B User Manual

SNMP Setup

The SNMP Setup page enables configuration of the SNMP agent that resides within the
Gateway card.

Read Write Port

TCP/IP port number (range:1-65535) used in all SET and GET SNMP operations.
Default is 161. The SNMP manager should match this value to operate correctly.
Set as required, then click S to save the new value or P to return to the default.

MIB2 sysContact

Customer-specified name of person responsible for equipment.
Note: In order for SNMP to operate, there must be a physical Ethernet
connection available.
Note: Changing this value will restart the SNMP agent.
IQH4B
User Manual
59