Control 1-10, 11-20
The Control pages display information about the controllers for each slot.
Update Packet Stats
When the modules receive commands from control clients, the number of commands are
counted. If the Update Packet Stats box is checked, the number of control packets from the
currently-selected connected controller and from all connected controllers is shown to the
right of the controller address. The number of blind control packets is shown to the right of the
blind controller address.
If the Update Packet Stats box is unchecked, the packet counts will be replaced with dashes.
Show Session
This controls which client is displayed by the other Control menu items. Click and drag the
slider to increase or decrease the number of clients displayed.
Note: The packets are still counted while Update Packet Stats is
disabled. When enabled, the Gateway will display current totals; they will
not restart from zero.
IQH4B
User Manual
55