Rear Panel View; Features - GRASS VALLEY IQH4B User Manual

Rear Panel View

The IQH4B enclosure rear panel, without modules, is shown below.

Features

The IQH4B modular enclosure provides the following features:
20
• 20 single or 10 double width modules (or any combination).
• Integrated web browser based RollCall configuration and control.
• SNMP Control and Monitoring of all RollCall-enabled IQ modules as standard.
• Dual redundant network architecture over Ethernet and RollNet
control applications to function even if a complete network failure occurs.
• Plug-in Gateway communications card to enable RollCall over TCP/IP control, with support
for upgradeable connectivity to handle future communication standards.
• 2 x analog reference signal distribution for dual standard (Bi-Level or Tri-Level), dual video
standard (SD or HD), and reference redundancy applications.
• Hot-swappable redundant power supplies with PSU status
Gateway control card rear
• Optimum use of rack space – frames do not require any additional ventilation spacing.
• In-service replaceable fan units.
• Variable fan speed, dependent upon load and ambient temperature.
• Full chassis monitoring, including Inlet and Outlet temperature, fan condition and module
status.
• Full CE and UL compliance.
panel.
enables mission critical
reporting through GPIs on the