Front (Gateway Card) Controls And Leds; Front Panel Connector - GRASS VALLEY IQH4B User Manual

Locking Screw
To close the front panel:

Front (Gateway Card) Controls and LEDs

Front Panel connectors, controls and LEDs are provided by the Gateway Card, fitted into a
dedicated slot in the IQH4B enclosure.

Front Panel Connector

This connector connects to the front panel and provides power to the LED on the front panel.
The two-digit RollCall address display has a secondary mode of operation. Momentarily press
either of the two No Function buttons, and the IP address followed by the net mask address
will be displayed one number at a time on the 7-segment LED display.
28
3 Pull the panel upward using the handle in the center.
4 Turn the locking screw approximately half a turn to secure the panel.
Handle