Removing the Door
The IQH4B can be used without the door if required.
To remove the door:
Rear Panel (Gateway Card) Connections
Rear Panel connectors are provided by the
Gateway card, fitted into a dedicated slot in
the IQH4B enclosure.
26
1 On the left side of the unit, looking from the
front, locate the spring-loaded door release pin:
2 Push the pin in and
disengage the door:
3 Move the door to the left to disengage the right-hand hinge, and remove the door. Store
carefully to avoid damage.
Release
Pin
RollNet
Ethernet 1
Ethernet 2
Reference 1
Reference 2