Connections/SNMP
The Connections/SNMP page provides information about SNMP connections.
Slot Name
This shows the RollCall controller client name/per session. Note if SNMP is enabled, one of the
session names will correspond with the name of the Gateway module.
Connection Status
Displays current status of the connection to the corresponding slot. Possible values are:
Configuration
Provides controls allowing SNMP behavior to be defined. Also provides fully-cached menu and
control sessions to any or all modules in the enclosure, giving very fast access for modules with
many controls.
Options are:
• Disabled: Session is disabled.
• Pending: Session is enabled but is waiting to initialize.
• Connecting: Session is initializing.
• Control Load: Session is loading all control values.
• Active: Session is fully initialized, that is incoming client control connections will use the
cached session on the Gateway.
IQH4B
User Manual
57