Slots 1-10, 11-20; Name - GRASS VALLEY IQH4B User Manual

Slots 1-10, 11-20

The Slots pages allow each slot to be named and interrogated.

Name

The Name section displays the name and type of module fitted in the enclosure slot. See
Examples of Slot Use
The following controls are provided:
on page 54 for more information.
User-Defined
Name
Unit Type
• User-Defined Name: This enables a slot to be given a descriptive name, e.g. IQSYN22-
ChanA. Providing a module with the correct Bound Unit ID and Unit ID (see
below) is found in that slot, the user-defined name will be used.
If a module which does not have the correct ID details is fitted to the slot, the generic name
associated with the card's Type ID, e.g. IQCSPI, will be displayed in the Unit Type field. The
User-Defined Name will remain the same, however. If this is subsequently edited, the
current Unit ID will be copied to the Bound Type ID (see below).
To enter/modify the unit name, type a new name in the User-Defined Name field and
click S to save. To return to the default name, click P.
• Unit Type: This shows the type of module fitted in the slot, e.g. IQSYN22. If no module is in
the slot, No Unit Fitted is displayed. If an incompatible module is fitted into a slot, NOT
RollCall 3! is displayed.
IQH4B
User Manual
Preset
Save
Unit Type,
51