Type; Non-Rollcall - GRASS VALLEY IQH4B User Manual

Type

This displays the unique identifier of the module fitted in the slot. See
page 54 for more information.
The following controls are provided:

Non-RollCall

This allows a non-RollCall card occupying a slot to be identified. See
page 54 for more information.
Passive units can be given a name, indicating to RollMap that a card exists.
52
Bound Unit ID
Unit ID
• Bound Unit ID: If a module matching the specified Bound Unit ID is fitted, the Gateway
will display the user-specified name in the Name field (see
not matching the card type is installed in the slot, the actual card type will be displayed in
the Unit Type field. Names and types can be set up before installation of the modules if
required. The Bound Type ID should be edited after the Editable Name is updated.
To enter/modify the Bound Type ID, type a new number in the field and click S to save. To
return to the default, click P.
• Unit ID: This displays the identifier of the module fitted in the slot.
Enable
ID Name
• Enable: Select this option to indicate that a non-RollCall card is in the slot. When this
option is selected, the installed unit type of the card appears as NOT RollCall 3!, and the
Unit ID appears as 65535.
Note: If there is a RollCall-responsive card in the slot, selecting this
option has no effect.
• IDNAME: This field allows an IDNAME log field to be associated with logs from a non-
RollCall card. To enter/modify the Non RollCall ID name, type a new name in the editable
field and click S. To return to the default name, click P.
Note: Non-RollCall cards send a MSG=NON ROLLCALLMODULE log to
indicate their presence.
Examples of Slot Use
Preset
Save
Unit Type, above). If a module
Examples of Slot Use
Preset Save
on
on