For The Installer Delivery And Handling - Nibe VPB S Manual

3 For the Installer
Delivery and handling
TRANSPORT
VPB S/ VPBS S should be transported and stored vertic-
ally in a dry place. The VPB S/ VPBS S may, however,
be carefully laid on its back when being moved into a
building.
ASSEMBLY
The water heater is only designed for upright installation.
The water heater's installation area should always have
a temperature of at least 10 °C (to prevent the risk of
damage from frost) and equipped with a floor drain.
Position VPB S/ VPBS S on a firm base that can take the
weight, preferably on a concrete floor or foundation.
Use the product's adjustable feet to obtain a horizontal
and stable set-up.
20-55 mm
30 - 50 mm
NIBE VPB S/ VPBS S
0 R
0
R
SUPPLIED COMPONENTS
1 x pressure reduction
valve
1 x armoured hose (expan-
sion vessel) (2 for
VPBS S300)
1 x expansion vessel with
holder
1 x seal
Chapter 3 | For the Installer
1 x tundish (2 for
VPBS S300)
H o t w a te r 5 1 °C H M flo w 4 9 (5 0 ) °C
-2 0 + 2
0 R 1
1 x solenoid valve(2 for
VPBS S300
1 x cold water inlet and ex-
pansion relief valve, water
heater
H o t w a te r 5 1 °C H M flo w 4 9 (5 0 ) °C
-2 0 + 2
0 1
R
11