Table of Contents
Advertisement
Software No. Display
The software number of the Inverter for which constants are stored in
the Digital Operator is displayed.
Example: Displaying Software No. of Inverter for which Constants Are
Stored in EEPROM in Operator
•
Enable the setting for
constants n001 to
n179.
•
Execute Software No.
Display (Sno)* using
the Constant Copy
Function Selection
(n176).
* Displays the lower 4 digits of the software version.
Display List
Operator
Display
194
Explanation
•
Press DSPL to light
[PRGM].
•
Press ENTER to display
the set value.
•
Change the set value to 4
by pressing the
key.
•
Press ENTER.
•
Change the constant No. to
n176 by pressing the
key.
•
Press ENTER to display
the set value.
•
Change the set value to
Sno by pressing the
key.
•
Press ENTER.
•
Press DSPL or ENTER.
Description
Lit: Constant copy function selection
enabled.
Lit: READ selected.
Flashes: READ under execution.
Lit: Writing (COPY) selected.
Flashes: Writing (COPY) under execu-
tion.
Lit: VERIFY selected.
Flashes: VERIFY under execution.
Lit: Inverter capacity display selected.
Lit: Software No. display selected.
Operator Display
(May be a different constant No.)
(Lit)
(May be a different set value.)
or
(Flashes)
(Lit for one second.)
(The constant No. is
displayed.)
or
(Lit)
(Lit)
(Lit)
or
(Software version: VSP030010)
(The constant No. is
displayed.)
Corrective Action
-
-
-
-
-
-
Advertisement
Chapters
Table of Contents
