YASKAWA Varispeed V7 Instruction Manual page 192

Example: Comparing Constants Stored in EEPROM in Operator with
Constants in Inverter
• Enable the settings
for constants n001
to n179.
• Excute VERIFY by
Constant Copy
Function Selection
(n176).
• Display the
unmatched con-
stant No.
• Display the con-
stant value in the
Inverter.
• Display the con-
stant value in the
Digital Operator.
• Continue the exe-
cution of VERIFY.
While a constant No. that is not the same is displayed or a constant
value is displayed, press STOP/RESET to interrupt the execution of the
verification. End will be displayed. Press DSPL or ENTER to return to
the constant No.
Explanation
• Press DSPL to light
[PRGM]
• Press ENTER to display the
set value.
• Change the set value to 4
by pressing the
key.
• Press ENTER.
• Change the constant No. to
n176 by pressing the
key.
• Press ENTER to display the
set value.
• Change the set value to vFy
by pressing the
key.
• Press ENTER.
• Press ENTER.
• Press ENTER.
• Press the key.
• Press DSPL or ENTER.
7. Programming Features
Operator Display
(May be a different constant No.)
(Lit)
(May be a different constant No.)
(Flashes)
or
(Lit for one second.)
(The constant No. is
displayed.)
or
(Lit)
(Lit)
(Flashes while executing
or
VERIFY)
(Flashes) (When n011 is
different.)
(Flashes)
(Flashes)
(Flashes while executing
the verification)
(End is displayed when the
verification has been completed.)
(The constant No. is
displayed.)
191