Segway FUGLEMAN SGW1000F-U2 Owner's Manual page 99

to be rolled on one end of the barrel and may damage the
rope or winch.
• Note that the rope-drawing capacity of the winch is the
maximum rope-drawing capacity of the first layer. Do not
operate the winch with overload capacity past this amount of
rope.
• Never hook the rope back to itself, otherwise the rope will
become damaged. Use trunk protection protector.
• Before operation, make sure that the winch is firmly installed
on the vehicle or bracket.
• Before moving heavy objects, check the rope to prevent kinks
and uneven wire layers. The rope slack must be properly
tightened under a weight of about 50 Kg.
• When pulling the load, be sure to place a protective layer
on the rope near the hook end. This will help to prevent
serious injuries and damage if the rope breaks.
• Do not move the vehicle to assist in hauling heavy objects,
it's easy to overload the winch and cause damage to the rope.
• Stay away from the danger area during winch operation.
The dangerous area is the area of winch drum, fairlead,
rope, pulley block, hook and motor.
• When winch is under load, do not approach or cross the rope.
87
O P E R A T I O
O P E R A T I O
N
N