Table of Contents
Advertisement
New Operator Driving Procedures
1.
Before operating this vehicle, read and understand the
owner's manual and all warning and instruction labels.
2.
Perform pre-ride check.
3.
Do not carry goods during this period.
4.
Do not carry passengers until you have driven this vehicle for
at least 2 hours.
5.
Choose a suitable wide open area to familiarize yourself with
the operation of the vehicle.
6.
Safety helmets, eye protection, gloves, long-sleeved shirts,
trousers, ankle boots and safety belts must be worn at all
times.
7.
When driving this vehicle, make sure that all doors are closed
and locked.
8.
Sit in the driver's seat, fasten the seat belt, and put the
transmission into the "P" position.
9.
Step on the brake pedal and release the parking brake.
10. Start the engine.
11. Put the transmission into Low gear (L).
12. Check your surroundings and determine your driving route.
13. Hold the steering wheel with both hands, slowly release the
brake, depress the accelerator with your right foot, and start
driving.
14. Drive slowly at first, and practice starting, stopping, turning,
maneuvering, using the accelerator, brakes, and reversing on a
flat ground. When learning how the vehicle operates, practice
left and right turns at a slow speed.
15. When you make a turn proficiently and start to run at a faster
speed, observe the following precautions:
69
O
P
E
R
A
T
I
O
O
P
E
R
A
T
I
O
N
N
- Quick Links:
- Features and Controls
- Maintenance and Storage
Hide quick links:
Advertisement
Chapters
Table of Contents
