Segway FUGLEMAN SGW1000F-U2 Owner's Manual page 101

• When the winch is in use, be sure to start the vehicle engine
and set the gear to "N" position.
• When the winch is working, it will draw voltage, so you must
start the vehicle and step on the accelerator lightly to avoid
damage to the battery.
• If severe noise or vibration occurs during the use of the
winch, stop the winch immediately.
• When the winch is not used, unplug the controller.
When releasing or retrieving the winch rope, both ends of the
rope must be left with sufficient length to prevent the rope from
being over-rolled in or out. When the rope is retrieving, please
maintain a certain tension so that the wire can be retracted
smoothly and can be wound tightly during retrieving.
Always use the hook strap to pull the hook. Do not hold the hook with
your hands. This is not only important when winding the rope, but also
when removing the rope from the winch under power.
!
WARNING
!
WARNING
89
O P E R A T I O
O P E R A T I O
N
N