Segway FUGLEMAN SGW1000F-U2 Owner's Manual page 150

MAINTENANCE AND STORAGE
1. Place the vehicle on a level surface with the headlights
approximately 10m from a wall.
2. Measure the distance from the floor to the center of the
headlights and make a mark on the wall at the same height.
3. Apply the brakes. Start the engine. Turn the headlights on.
4. Observe the headlight aim. The most intense part of the
headlight beam should be aimed 24 cm below the mark on the
wall. Include the weight of a rider on the seat when
adjusting headlights.
5. If a headlight needs to be adjusted, locate the adjustment
screw at the back of the headlight (see page 139).
138
10m
24 cm