the aircraft;
- in any position along the roll axis.
(b) Helicopters
KANNAD 406 AF-COMPACT may be installed on helicopter. The ELT unit
should be mounted:
• with "Flight direction" arrow towards the front of the helicopter;
• with the front face connectors pointing downwards at a 45° angle to
the yaw axis;
• in any position along the 45° axis.
(2) Fix the mounting bracket
- Drill 4 holes Ø 6 mm in the aircraft structure according to "Drilling mask":
Refer to Compact Mounting bracket (S1840502- 01), drilling mask, page
28
[Inner holes (1, 2, 3, 4) should be preferred] orr
Universal Mounting bracket (S1840502- 02), drilling mask, page 29
according to mounting bracket used.
- If the aircraft structure is not solid enough to withstand a 500 kg traction
on the bracket, a reinforcement plate (not supplied) should be installed
as shown Figure 9: Bracket installation.
- Fix the bracket with the 4 screws, 8 washers and 4 nylstop nuts supplied.
IMPORTANT: tighten to a torque between 4 and 5 Newton x meter.
INITIAL INSTALLATION MANUAL
KANNAD 406 AF-COMPACT / KANNAD 406 AF COMPACT ER
Figure 9: Bracket installation
Refer to Compact
PAGE: 10
SEP 16/2009