Kannad 406 AF-COMPACT Installation Manual page 26

KANNAD 406 AF-COMPACT / KANNAD 406 AF COMPACT ER
On the RCP side:
- Strap pins 4 and 5 of the female 9-pin D-SUB connector supplied with
the pack.
- Solder the wires to the female 9-pin D-SUB connector as follows:
• Pin 8 (RCP COMMON) has to be connected to Pin G (RCP
COMMON) of the ELT;
• Pin 4 (RCP RESET) has to be connected to Pin A (RCP RESET) of
the ELT;
• Pin 9 (RCP LED) has to be connected to Pin J (RCP LED) of the ELT.
• Put heat-shrinkable sleeves to protect the pins.
- Connect the female 9-pin D-SUB connector to the male 9-pin D-SUB
socket of the RC200.
Figure 17: Wiring of 3-wire bundle between RC200 and ELT
INITIAL INSTALLATION MANUAL
PAGE: 22
SEP 16/2009