Introduction; Kannad 406 Af-Compact System Presentation; System Overview - Kannad 406 AF-COMPACT Installation Manual

1. Introduction

The instructions in this manual provide the information necessary for the initial
installation of KANNAD 406 AF-COMPACT ELT system.

2. KANNAD 406 AF-Compact System Presentation

A. System overview
NOTE: for details of approved part number of KANNAD 406 AF-COMPACT
system, Refer to Section 10. Compatibility list for KANNAD 406 AF-COMPACT
System, page 39.
KANNAD 406 AF-COMPACT system is composed of:
1. a transmitter;
2. a mounting bracket;
3. a remote control panel (RCP)
4. a DIN-12 connector or programming dongle to connect the RCP;
5. an approved outside whip or rod antenna.
The transmitter and bracket are installed in the aircraft near the tail. The outside
antenna is mounted on the fuselage near the tail. The remote control panel
is installed in the cockpit and connected to the ELT with a 2 or 3-wire bundle
(not supplied) according to the type of Remote Control Panel.
Note: (1) The RCP is optional only if the commands and controls of the
ELT are reachable and visible from the pilot seated position.
(RTCA DO-204A):
"Equipment control and indicator installed for in-flight use shall be
readily accessible from the cockpit crew position. The cockpit crew
shall have an unobstructed view of visual indicator when in the nor-
mal seated position."
INITIAL INSTALLATION MANUAL
KANNAD 406 AF-COMPACT / KANNAD 406 AF COMPACT ER
(1)
;
(1)
PAGE: 1
SEP 16/2009