Bracket; Remote Control Panel - Kannad 406 AF-COMPACT Installation Manual

B. Bracket
The bracket installed near the tail is designed to fix the ELT with a Velcro®
strap. This enables quick removal of the ELT for maintenance or exchange.
Figure 4: KANNAD 406 AF-COMPACT with Mounting Bracket
C. Remote Control Panel
An RC200 remote control panel is available for installation in the cockpit in
order to enable the pilot to monitor and control the ELT status.
The following controls are to be found on the panel:
• 3-position switch (ON, ARMED, RESET&TEST);
• red light;
The remote control panel is connected to the ELT via a 3-wire cable equipped
with a DIN-12 connector on the ELT side and a D-SUB Female 9Pts connector
on the other side.
Note: the 3-wire cable is not supplied.
INSTALLATION MANUAL OPERATION MANUAL INSPECTION LOG
Figure 5: RC200 Remote Control Panel
KANNAD 406 AF-COMPACT
PAGE: 5
FEB 01/2008