Figure 4: RC200 Remote Control Panel
(2) RC100 KIT
The RC100 remote control panel is connected to the ELT via a 3-wire
cable equipped with a DIN-12 connector or optional programming dongle
on the ELT side and directly connected to the RCP on the other side.
Note: the 3-wire cable is not supplied.
Figure 5: RC100 Remote Control Panel
(3) RC102 KIT
The RC102 remote control panel is connected to the ELT via a 2-wire
cable equipped with a DIN-12 connector or optional programming dongle
on the ELT side and directly connected to the RCP on the other side. 2
types of front panels are supplied in the kit. The appropriate front panel
should be choosen according to the place available on the aircraft's
instrument panel.
Note: the 2-wire cable is not supplied.
Figure 6: RC102 Remote Control Panel
INITIAL INSTALLATION MANUAL
KANNAD 406 AF-COMPACT / KANNAD 406 AF COMPACT ER
PAGE: 4
SEP 16/2009