KANNAD 406 AF-COMPACT / KANNAD 406 AF COMPACT ER
be in front of the flat part of the LED stand;
- Insert LED (5) fitted with LED stand (7) inside the LED mounting (2);
- Install the switch (3) with washer (3a) and nut (3b), locked position
upwards. Tighten nut.
Figure 12: RC100 mounting diagram
Connect RCP to ELT
Refer to Figure 13: Wiring of 3-wire bundle between RC100 and
INITIAL INSTALLATION MANUAL
ELT.
PAGE: 15
SEP 16/2009