Kannad 406 AF-COMPACT Installation Manual page 22

KANNAD 406 AF-COMPACT / KANNAD 406 AF COMPACT ER
• Drill 4 holes of Ø 3 mm for the screws used to fix the RCP;
• Screw the front plate (1b) onto the instrument panel;
• Install the LED mounting (2), with washer (2a) and nut (2b). Tighten
nut;
• Connect the anode (long leg) of LED (2c) to A of PCB (3a);
• Connect the cathode (short leg) of LED (2c) to C of PCB (3a);
• Connect wires to K and M of PCB (3a);
• Insert the LED into the LED stand (2d) taking care the flat part of the
LED be in front of the flat part of the LED stand;
• Insert LED (2c) fitted with LED stand (2d) inside the LED mounting (2);
• Install the switch and PCB assembly (3b+3a) with washers (3c) and
nuts (3d), locked position upwards. Tighten nut;
• Stuck the "identification label" (4) on the cable bundle near the PCB.
INITIAL INSTALLATION MANUAL
PAGE: 18
SEP 16/2009