Introduction; Attention; Instructions Of Safety - Teltonika FM2100 User Manual

1 INTRODUCTION

1.1

Attention

1.2

Instructions of safety

This chapter contains information on how to operate FM2 safely. By following these
requirements and recommendations you will avoid dangerous situations. You must read
these instructions carefully and follow them strictly before operating the device!
The device uses a 10V...30V DC power supply. The nominal voltage is 24V DC. The
allowed range of voltage is 10V...30V DC, power – not more than 12 W.
Do not disassemble the device. Do not touch before
unplugging the power supply if the device is damaged, the
power supply cables are not isolated or the isolation is
damaged.
All wireless data transferring devices produce interference
that may affect other devices witch are placed nearby.
The device may be connected only by qualified individuals.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second class
PC (with autonomic power supply).
The device is susceptible to water and humidity.
Warning!! May explode, if a wrong accumulator is used.
Any installation and/or handling during a lightning storm
is prohibited.
FM2100 has not USB interface; it has Mini USB connector
type with physical RS232 interface.
Do not plug it to PC's USB port.
Please use cables provided with FM2100 device.
Teltonika is not responsible for any harm caused by using
wrong cables for PC <-> FM2100 connection.
4