CONTENT Know your device ........................................3 Pinout ...........................................4 Set up your device ......................................5 PC Connection (Windows) ....................................6 How to install USB drivers (Windows) ................................6 Configuration........................................7 Quick SMS configuration ....................................9 Mounting recommendations..................................11 Basic characteristics ......................................12 LED indications ......................................... 12 Safety information ......................................16 Certification and Approvals ....................................
Device is ready to be from both sides. disabled or read our Wiki in place where it does not connected. how to enter it later in obstruct other components. Teltonika Configurator Make sure that Micro- SIM card cut-off corner is pointing forward to slot.
Bluetooth. Choose your device named – “FMC003_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done. You are now ready to use the device on your computer. wiki.teltonika-gps.com/view/FMC003_LED_status 1 Page 6, "How to install USB drivers"...
CONFIGURATION At first FMC003 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here . Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
Page 8
Data Acquisition – where data acquiring parameters can be configured. More details about FMC003 configuration using Configurator can be found in our Wiki wiki.teltonika-gps.com/view/FMC003_Status_info wiki.teltonika-gps.com/view/FMC003_Status_info#GNSS_Info wiki.teltonika-gps.com/view/FMC003_Status_info#GSM_Info wiki.teltonika-gps.com/view/FMC003_Status_info#I.2FO_Info wiki.teltonika-gps.com/view/FMC003_Status_info#Maintenance wiki.teltonika-gps.com/index.php?title=FMC003_GPRS_settings After connection to Configurator Status window will be wiki.teltonika-gps.com/index.php?title=FMC003_Data_acquisition_...
QUICK SMS CONFIGURATION Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it: « setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0» Note: Before SMS text, two space symbols should be inserted. GPRS SETTINGS: 2001 –...
Page 10
After successful SMS configuration, FMC003 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator SMS parameters wiki.teltonika-gps.com/view/Teltonika_Configurator wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list Quick Manual v1.1 // FMC003...
MOUNTING RECOMMENDATIONS CONNECTING THE DEVICE TO THE VEHICLE: Find OBDII connector in your vehicle. Most common OBDII connector locations. Quick Manual v1.1 // FMC003 Telematics...
LED INDICATIONS BASIC CHARACTERISTICS Module NAVIGATION LED INDICATIONS MeiG SLM320-L16A, MeiG SLM320- Name Behaviour Meaning PE2C, Teltonika TM2500 Permanently LTE(CAT1)/2G(GSM/GPRS)/GNSS/ GNSS signal is not received Technology switched on BLUETOOTH Blinking every Normal mode, GNSS is working second GNSS GNSS is turned off because:...
Page 13
Data HS CAN, MS CAN, SW CAN, K-line Power 10 - 30 V DC with overvoltage Input voltage range protection 170 mAh Li-Po battery 3.7 V (0.63 Back-up battery Internal fuse 3A, 125V https://teltonika.lt/product/bluetooth-sensor/ Quick Manual v1.1 // FMC003 Telematics...
Page 14
OEM Fuel level, odometer and up Physical Specification to 32 vehicle onboard parameters, supported OBD protocols: Dimensions 67,2 x 49,6 x 25 mm (L x W x H) ISO 9141-2 (5 baud init, 10.4 kbaud) Weight 63 g ISO 14230-4 KWP (5 baud init, 10.4 kbaud) ISO 14230-4 KWP (fast init, 10.4 Operating Environment...
Page 15
Manual Geofence, Trip Sleep, Online Deep Sleep, Sleep modes Deep Sleep, Ultra Deep Sleep FOTA Web FOTA Teltonika Configuration and Configurator (USB, Bluetooth), firmware update FMBT mobile application (Configuration) Configuration, Events, Debug GPRS commands Configuration, Debug Time GPS, NITZ, NTP...
Before unmounting the device from vehicle, ignition MUST be OFF. The device is susceptible to water and humidity. Teltonika is not responsible for any harm caused by wrong cables used for connection between PC and FMC003 WARNING! Do not use FMC003 device if it distracts driver or causes inconvenience due to OBDII placement.
User‘s Manual before your start using the electronic and electric equipment should not be device. Full User‘s Manual version can be found in mixed with general household waste. Wiki 1 wiki.teltonika-gps.com/index.php?title=FMC003 Para maiores informações, consulte o site da ANATEL www.anatel.gov.br RoHS is a directive regulating the manufacture, Este equipamento não tem direito à...
WARRANTY TELTONIKA guarantees its products to be free of any manufacturing defects for a period of 24 months. With additional agreement we can agree on a different warranty period, for more detailed information please contact our sales manager. Contact us teltonika-gps.com/about-us/contacts All batteries carry a reduced 6 month warranty period.
Need help?
Do you have a question about the Telematics FMC003 and is the answer not in the manual?
Questions and answers