Setting Up The Machine For Use Witha Pc Modem - Sharp AR-FX9 - Fax Interface Card Facsimile Manual

Operation manual
Hide thumbs Also See for AR-FX9 - Fax Interface Card:
Table of Contents

Advertisement

SETTING UP THE MACHINE FOR USE WITH A PC MODEM
The machine is set for not detecting automatically the fax tone when you pick up an extension telephone. However,
you can activate this function by following the procedure below.
If you are using a modem on the same line, do not activate this function, otherwise the machine will mistakenly
Warning
attempt to receive the transmission from your computer.
1
Press the [MENU] key.
1,2,3,
1,2,3,
2
Press the [
] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [
] key (
until "15:FAX SIGNAL RCV" appears,
and then press the [OK] key.
Selection
"15:FAX SIGNAL RCV"
4
Press the [
] key (
to select "1:ON" or "2:OFF".
1,2,3,
1,2,3,
) or [
] key (
)
) or [
] key (
)
) or [
] key (
)
5
Press the [OK] key.
1,2,3,
1,2,3,
6
Press the [MENU] key.
1,2,3,
1,2,3,
INITIAL SETTINGS
Press the [MENU] key to
exit.
37
2

Advertisement

Table of Contents
loading

Table of Contents