Cleaning The Material End Sensor - Novexx Solutions ALX 73 Series Operating Manual

C
LEANING

Cleaning the material end sensor

The material end sensor [21A] is located inside the ma-
terial guide. The sensor must be cleaned of material
and dust residue regularly. The cleaning intervals de-
pend on the material in use.

Clean the sensor arm using compressed air (canned
air is available as an accessory).

If the sensor is heavily contaminated, use cleaning
solvent and a lint-free cloth to clean the sensor.
13 | Sensors
[21] Material end sensor (A) in the inside material guide
Operating manual ALX 73x | file version 00 | 04/2011
ALX
73x
A