Keyboard Backlight; How To Calibrate The Ptc-150 Camera Position For Your Tvs-2000A System - Datavideo TVS-2000A Instruction Manual

Keyboard Backlight

The RMC-280 allows the user to manually adjust the keyboard backlight. The steps are
outlined as follows:
1. Press the knob located below DSK1 key once and the DSK1 key will flash green
2. Rotate the knob right to enhance and left to dim
3. Press the knob again to turn off this feature
2.6 How to Calibrate the PTC-150 Camera Position for Your TVS-2000A
System
After finishing the basic system setup, please follow the steps below to optimize the visual
effect of the TVS-2000A's tracking function.
Step 1: Make sure the tripod is placed on a flat surface and then mount the PTC-150 camera
on the tripod. Focus the camera on the center of the frame.
Step 2: Reset "Pan, Tilt, Zoom" of PTC-150 to factory default. Please select 7: Reset P/T/Z 
Yes on the PTC-150's main menu.
• Open the camera's main menu.
• Move down the menu and select item 7 Reset P/T/Z.
18