Wiring the channels
April 2022
4.2
Access the wiring channels
Procedure
1. Remove the wiring access cover to reveal the inputs and outputs wiring terminal
2. Confirm which transmitter channels are activated, or ON, and identify the type of
3. Record the channel and wiring configuration on the label provided inside the
26
block connectors.
configuration you will be wiring to based on the options available.
Figure 4-1: Activated channel identification
A. Key to identify the activated input/outputs
transmitter housing cover.
Micro Motion 5700 Transmitters with Configurable Inputs and Outputs
Installation Manual
MMI-20027478
A