Mounting and sensor wiring
April 2022
3. Gently set the junction box into its new position, confirming that the position is
4. Replace the clamp in its original position and tighten the cap screw. Torque to 28 in
24
Figure 3-17: Rotate the transmitter on the junction box
locked.
lbf (3.16 N m) to 30 in lbf (3.39 N m).
Figure 3-18: Re-attach the clamp
Micro Motion 5700 Transmitters with Configurable Inputs and Outputs
Installation Manual
MMI-20027478