Ti Interface Drawing - Renishaw ATOM Installation Manual

Ti interface drawing

4-40 UNC × 2
Interface set-up LED
(digital interface only)
40
33.3
Cover plate
R> 20 Dynamic bend radius
R> 10 Static bend radius
CAL button access hole Ø2.4
8
16
CAL button operation
Push and release (< 2 seconds) - Calibration (CAL) routine initiation / exit.
Push and release (> 3 seconds) - Automatic Gain Control (AGC) initiation / exit.
Push and hold during power 'Off / On' cycle - Restore factory defaults.
Refer to 'Readhead LED diagnostics' and 'Ti LED diagnostics' for LED indications.
67
62
6 min
Dimensions and tolerances in mm
www.renishaw.com 65