KERN KFB-TM Operating And Installation Instructions page 326

EC Type-Approval Certificate
No. DK 0199.202 Revision 1
KFN-TM / KFB-TM / BFB / IFB / SFB / UFB / UFN / NFB /
BFN / NFN
NON-AUTOMATIC WEIGHING INSTRUMENT
Issued by DELTA Danish Electronics, Light & Acoustics
EU - Notified Body No. 0199
In accordance with the requirements for the non-automatic weighing instrument of
EC Council Directive 2009/23/EC.
Issued to Kern & Sohn GmbH
Ziegelei 1
D 72336 Balingen-Frommern
GERMANY
In respect of Non-automatic weighing instrument designated KFN-TM / KFB-TM / BFB /
IFB / SFB / UFB / UFN / NFB / BFN / NFN with variants of modules of load
receptors, load cells and peripheral equipment.
Accuracy class III and IIII
Maximum capacity, Max: From 1 kg up to 199 950 kg
Verification scale interval: e = Max / n
Maximum number of verification scale intervals: n = 6000 for single-interval
and n = 2×3000 for multi-range and multi-interval (however, dependent on
environment and the composition of the modules).
Variants of modules and conditions for the composition of the modules are set
out in the annex.
The conformity with the essential requirements in annex 1 of the Directive is met by the ap-
plication of the European Standard EN 45501:1992/AC:1993 and WELMEC 2.1:2001.
Note: This certificate is a revised edition which replaces previous revisions.
The principal characteristics and approval conditions are set out in the descriptive
annex to this certificate.
The annex comprises 14 pages.
Issued on 2011-12-19
Valid until 2019-12-07 Signatory: J. Hovgård
DELTA
Danish Electronics,
Light & Acoustics
Venlighedsvej 4
2970 Hørsholm
Denmark
Tel. (+45) 72 19 40 00
Fax (+45) 72 19 40 01
www.delta.dk
VAT No. DK 12275110