Not Verifiable Weighing Systems - KERN KFB-TM Operating And Installation Instructions

6.9.2 Non verifiable weighing systems
Call up menu:
1. Switch-on balance and during the selftest press
2. Press subsequently
„PO CHK" will be displayed.
3. Press repeatedly until „P3 CAL" will be displayed.
4. Confirm with ; press
appears.
5. Acknowledge using

Press to confirm; press
noLin = adjustment
LineAr = linearization, see chap. 6.10
How to carry out adjustment:
 Confirm menu setting „noLin" by
Ensure that there are no objects on the weighing plate.

Wait for stability display, then press
 The currently set adjustment weight will be displayed.

To change by using the navigation buttons (see chap. 2.1.1)
select the desired setting, the active digit is flashing.

Acknowledge with

Carefully place adjusting weight in the centre of the weighing
plate. Wait for stability display, then press

After the adjustment the balance will carry out a self-test.
Remove adjusting weight during selftest, balance will return
into weighing mode automatically. An adjusting error or
incorrect adjusting weight will be indicated by the error
message; repeat adjustment procedure.
18
, , the first menu block
repeatedly until „CAL"
, the current setting is displayed.
to select setting.
.
.
.
.
.
KFB/KFN-TM-BA_IA-e-1220

