Composition Of Modules; Documents; Interfaces And Peripheral Equipment; Interfaces - KERN KFB-TM Operating And Installation Instructions

Hide thumbs Also See for KFB-TM:

Table of Contents

Composition of modules

In case of composition of modules, EN 45501 paragraph 3.5 and 4.12 shall be satisfied.

The documents filed at DELTA (reference No. A530648) are valid for the weighing instruments de-

scribed here.

The interfaces are characterised "Protective interfaces" according to paragraph 8.4 in the Directive.

Load cell input

A 5-terminal connector or 7-terminal connector for the load cell is positioned on the back of the enclo-

Other interfaces

The indicator may be equipped with one or more of the following protective interfaces located on the

main board or on separate interface boards.

Analogue output (0 - 10V / 4 - 20 mA)

Digital output

The interfaces do not have to be secured.

Connection between the indicator and peripheral equipment is allowed by screened cable.

The instrument may be connected to any simple peripheral device with a CE mark of conformity.

Measurement functions that will enable the use of the instrument as an automatic weighing instrument

are not covered by this type approval.

The count shown as result of the counting function is not covered by this NAWI approval.

When using the totalisation function creating a sum of several weighing results, this sum is only in-

formative, as it is not a legal value.

Issued by DELTA

Certificate of EU type-approval no. DK 0199.202 rev.1

Annex page 6 of 14

Table of Contents