Additional Decimal Digit; Switch-Over Weighing Unit (Verified Appliances) - KERN KFC-TM Operating And Installation Instructions

8.5 Additional decimal digit

For verified models only!
If SUM is not activated, press and hold
displayed and flashed for 3 seconds. Then return back to normal.

8.6 Switch-over weighing unit (verified appliances)

In verfied appliances only the weighing units gram „g" and kilogram „kg" are
available.
How to enable weighing units:
If for example „kg" has been set, the unit „g" can be enabled via the menu.
 Invoke menu item „unitS"
 Press
, "g" is displayed.
 To enable [on] / disable [off] the displayed weighing unit,
press Use
in this example „g" is enabled, i.e. set to „on".
 Confirm „on" by
 Return to weighing mode using
between „kg" and „g" using
You can change on the same way on non-verified appliances between the units:
kg, lb, FFA, g
TKFC-TM-A-BA_IA-e-2212
(Display flashes):
to change between „on" and „off". Here
.
Now you can change
.
button, additional decimal digit will be

25