Table of Contents
Advertisement
MSI-8000HD RF Remote Display
4.8
Remote Scale Setup
The MSI-8000HD RF Remote Display can be used to operate several MSI crane scales (MSI-4260, MSI-3460 and MSI-7300).
Some functions can also be set using the MSI-8000HD. The information in this section pertains to the setup of the scale being
used with the remote.
Parameters
Choices
4.8.1
Filter Setup
The filter settings are used to stabilize the weight in an unstable condition. Increasing the filter will improve the stability, however
settling times will be longer. The MSI-8000HD employs algorithms that speed up large weight changes while still controlling
vibration even with high filter settings.
Use the following steps to set up filtering.
1. Press
and
F3
PRINT
2. Press
to scroll to .
F2
3. Press
. The currently saved total mode displays.
F1
4. Press
to scroll through the choices.
F2
5. With choice displayed, press
6. Press
to save and exit to weighing mode.
ZERO
4.8.2
Total Mode
For the accumulation of multiple weighments, the Total function uses the displayed load, so gross and net readings can be
added into the same total.
There are four modes of totalizing, a manual and three auto modes.
All modes require that the weight on the scale return below 0.5% (relative to full scale) of Gross Zero or Net Zero before the
next weighment can be added. Applied weight must be ≥1% of full scale above Gross Zero or Net Zero before it can be
totaled.
14
Visit our website
Weight Filter – allows the scale to adjust to situations where there may be movement
See
Section 4.8.1 on page 14
Hi-2 – MSI-7300 only
Total Accumulation - sets the choice for weight accumulation for a single scale
When set to off, it's disabled
Total On - Is a manual choice for accumulation
Auto Total - Choices for setting automatic accumulations
Greater Than – Setpoint triggers when the tension exceeds the value
Less Than – Setpoint triggers when the tension is less than the value
Off - The setpoint parameter is disabled
Battery Life –Sets the options for standard or extended battery life;
See
Section 4.7 on page 13
Table 4-3. Settings for the Scale using the Remote
simultaneously. displays.
ZERO
to select. displays.
F1
www.ricelake.com
Description
(Section 4.3.2 on page
9)
(Section 4.5 on page
(Section 4.5 on page
(Section 4.5 on page
12)
(Section 4.3.2 on page
9);
12)
12)
Advertisement
Table of Contents
